Luminescence enhancement by hydrogenation of Si:Er,O

Erbium (Er)- and oxygen (O)-doped Cz–Si was additionally doped with hydrogen, using plasma enhanced chemical vapour deposition. Photoluminescence (PL) spectra show a large enhancement especially for samples treated with solid phase epitaxy before hydrogenation and annealing at 900°C later. Secondary ion mass spectroscopy measurements give evidence for an enhanced diffusion of O and Er at this temperature towards the surface. Etching shows that the PL does not stem from the heavily doped surface layer but from a deeper region with lower Er concentration. This conclusion is supported by the appearance of the so-called “cubic” centre with low solubility. Comparing the PL yield of the hydrogenated samples to that of samples with similar Er volume concentration but without hydrogenation still gives a large enhancement. We thus conclude that hydrogen can enhance the solubility of the cubic centre in Si:Er,O.     

Decay distribution of spontaneous emission from atoms in one-dimensional photonic crystal

Spontaneous emission behavior from atoms (or molecules) in one-dimensional photonic crystal with a defect is investigated. Taken all the TE and TM modes into account, the normalized spontaneous emission rate of the atom is calculated as a function of the position of the atom in the crystal. Results for both nonabsorbing dielectric structure and absorbing dielectric structure are presented. With the increase of the thickness of the defect in which the atoms are embedded, the oscillations of the spontaneous emission rate versus the position of the atom become dense and the lifetime distribution becomes narrow and sharp. The PC effect may lead to the coexistence of both accelerated and inhibited decay processes.     

激光溅射Ni等离子体与气相CH3OH团簇的反应

用激光溅射 分子束技术研究了气相中Ni的等离子体与甲醇分子团簇的反应 .观察到Ni+ (CH3 OH) n、NiO+ (CH3 OH) n、H+ (CH3 OH) n、H3 O+ (CH3 OH) n 四个种类的团簇正离子和CH3 O-(CH3 OH) n(n≤ 2 5 )一种团簇负离子 .详细考察了激光烧蚀等离子体作用于脉冲分子束的不同位置时 ,对团簇产物种类和团簇尺寸大小的影响 .发现NiO+ (CH3 OH) n 是由Ni+ (CH3 OH) n 团簇内的脱甲烷反应生成的 ,而H+ (CH3 OH) n、H3 O+ (CH3 OH) n主要是激光等离子体中的电子与甲醇团簇碰撞电离产生的     

微波吸收法研究Mn,Cu掺杂对ZnS:Mn,Cu光生载流子复合过程的影响

采用微波吸收法，测量了ZnS:Mn,Cu粉末材料受到超短脉冲激光激发后，其光生电子和浅束缚态电子的衰减过程.发现Mn,Cu的浓度对导带电子的寿命有明显的影响，提高掺杂浓度会使光生电子的寿命大大缩短，还研究了掺杂浓度对光致发光强度的影响. 关键词： 发光材料 硫化锌 光电子 微波吸收技术     

Microstructure and high-temperature wear resistance of a laser surface alloyed γ-TiAl with carbon

TiC reinforced composite coating on γ-TiAl alloy was successfully fabricated by laser surface alloying with carbon. The fine TiC reinforcing phase had a gradient distribution in the coating, and its growth morphology of TiC in laser surface alloyed coating was in unique faceted platelet-like. The composite coating exhibited high hardness and excellent high-temperature sliding wear resistance.     

最大2-正则诱导子图的长度

设G是2-连通图，c(G)是图G的最长诱导圈的长度，c′(G)是图G的最长诱导2-正则子图的长度。本文我们用图的特征值给出了c(G)和c′(G)的几个上界。     

Controlling the gain shape of Er^3＋—doped fluorozirconate fibre amplifier by a coherent field

We proposed a four-level system to explore the quantum interference effects on optical amplification.We found that the gain of the probe.including positions and values of gain peaks,can be adjusted by changing the coherent field and the incoherent pumping.At the same time,we can also modify the absorption profile of electromagnetically induced transparency by the incoherent pump.The results provide a method to flatten the gain of Erbium-doped fibre amplifiers.     

原子的吸收光谱和发射光谱的演示

介绍了利用光学多道分析仪和投影仪在课堂上实时演示原子的吸收光谱和发射光谱的实验方法。     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Dislocation unpinning model of acoustic emission from alkali halide crystals

The present paper reports the dislocation unpinning model of acoustic emission (AE) from alkali halide crystals. Equations are derived for the strain dependence of the transient AE pulse rate, peak value of the AE pulse rate and the total number of AE pulse emitted. It is found that the AE pulse rate should be maximum for a particular strain of the crystals. The peak value of the AE pulse rate should depend on the volume and strain rate of the crystals, and also on the pinning time of dislocations. Since the pinning time of dislocations decreases with increasing strain rate, the AE pulse rate should be weakly dependent on the strain rate of the crystals. The total number of AE should increase linearly with deformation and then it should attain a saturation value for the large deformation. By measuring the strain dependence of the AE pulse rate at a fixed strain rate, the time constantτ _s for surface annihilation of dislocations and the pinning timeτ _p of the dislocations can be determined. A good agreement is found between the theoretical and experimental results related to the AE from alkali halide crystals.